LP330-48 | LP330 Industrial-Grade Glass Protective WindowThe MidOpt LP330 48 protective window is the lowest cost alternative for dust covers or protection of optical components. No anti reflection coatings are provided; parallelism and surface quality are excellent. A slight reduction in infrared and deep red transmission may also be associated with the LP330. All MidOpt filters can also be purchased unmounted and in custom dimensions upon request from Machine Vision Direct. Technical Specifications

Advanced Illumination DL097-470I3S Downloads:

25 neutral density filter can be used to reduce the amount of light reaching the camera to an average of about 1% transmission

1 mm Outer Diameter 120 mm Illuminated Field of View

8° Angle of View @ 1

The MidOpt LB120-77 is used to raise color temperature by reducing unnatural red tones created by some sodium and mercury lighting

Brand Advanced Illumination Series DF196 Wavelength 530 Color Green Driver I3S Ingress Protection IP40 Inner Diameter 31

Brand Advanced Illumination Series RL2115 Wavelength 625 Color Red Orange Driver I3S Ingress Protection Not Rated Inner Diameter 18

it is recommended to use the LSR (LSR150) series over the LX and ODLX series

Electrical Characteristics + Voltage 24 VDC V Max Input Power Constant On 34 W Max Strobe Latency 30 us Max Strobe Duration No Limit Max Strobe Frequency 4000 Hz Max Strobe Duty Cycle 100 % Min Strobe Duration 30 ms Max Overcurrent Strobe Current 13000 mA Max Overcurrent Strobe Latency 6 us Max Overcurrent Strobe Duration 50 ms Max Overcurrent Strobe Frequency 4000 Hz Max Overcurrent Strobe Duty Cycle 10 % Min Overcurrent Strobe Duration 10 ms Max Overcurrent Strobe Input Power 312 W Max Duty Cycle 100 % PNP Trigger Voltage 3

8 mm Working ƒ/N ƒ/8 Resolution (Pixel Size) 115 μm Mount C-Mount Dimensions Approximate 462

177× Vertical Image Circle Diameter Not Specified Image Size Dimensions Not Specified Imager Format 2/3″ Distortion Typical (%) < 0

EBL48-470 / CC / SC15