Aerospace series. Bushes (plain and flanged), press-fit and thrust washers, oil‑retaining sintered bronze. Specification1 Scope This British Standard specifies material, dimensions, characteristics and identification of sintered bronze plain and flanged oilretaining bushes and oilretaining thrust washers for aircraft use. The bushes are charged with lubricating oil and have a normal oil content of from 25% 30% by volume, within the size range from 3 16 in. (4. 8 mm) to 21 2 in. (63. 5 mm) nominal bore. NOTE 1 Owing to slight variations between products of different

you can standardise the performance of sampling and inoculation devices used in the biotechnology processes

these basic principles can be applied to all configurations of the built environment (e

b) user and device remote discovery and online and offline status management mechanisms

fittings and their joints which are the subject of

Annex A (informative) - Benefits of registration

BS 4215-15 on insulated pins for use in electrode back-ups is useful for:

and aspects of transport and erection

These are covered by BS EN 62115

— voltage-reference diodes

where both the weld and the parent material are low-alloy and/or fine grained steel

to achieve reasonable standards of fire safety for all people in and around:

then it is risk to life