Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings - Elastomeric coating systems-polychloroprene or EPDM1 Scope This document specifies the minimum requirements for materials selection, surface preparation, application, inspection, testing, qualification and acceptance criteria of external coating for steel risers pipes used in the splash zone, their field joints and clamps guides, using an elastomeric protective coating based on polychloroprene, EPDM or equivalent. This is applicable for new construction and repair of applied pipes before installation.

The amount of fluoride measured is then expressed as hydrogen fluoride by convention

IEC 79-10:1995

Hexagon sized double-ended open-jawed spanners are some of the most commonly used spanners used for tightening nuts and bolts

This part of IEC 62880 describes a constant temperature (isothermal) aging method for testing copper (Cu) metallization test structures on microelectronics wafers for susceptibility to stress-induced voiding (SIV)

These items shall be considered to comply with this standard if they comply with the property requirements listed in Tables 3

• Basis material

Annex A (informative) Example Information Security Event and Incident Report Forms

for fitting glazing into frames of any material

It’s about protecting personally identifiable information (PII)

For land-based systems the scope of this document ends at the main power export cable suitable for connection to the grid

If there are two or more quality characteristics

To establish a regular inspection of the accessible parts of air-conditioning systems of an effective rated output of more than 12 kW