HD Double Width End Cantilever Timber Toeboard SideWooden toeboard used on various BS 1139 6: 2022 HD tower configurations to allow toeboards to be created to suit the variety of working platform shapes that are formed in these towers. This part is used in double width towers with a side cantilever.

The platform used on a double width end cantilever HD tower

All-aluminium toeboard used on the Alto Mini Tower

Used to secure the platform infill plate (Parts 2075/2077) on various BS 1139-6:2022 HD tower configurations where the plate is not secured by toe board sockets

The horizontal brace for a 1

This part is commonly used in linked and bridge towers for the first bay in towers with 1

The standard stair unit for use in HD Stair Towers between each platform level

The standard 2m frame used on all double width MD towers

The platform used on a single width end cantilever HD tower

The first ladder frame used on a single width HD tower with 5 rung starters

AGR towers replace traditional horizontal and diagonal braces with fully welded side frames

5m lift height version is also available

8m bays in the adjacent tower runs