Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope1 Scope This International Standard specifies a non destructive method for determining the thickness of anodic oxidation coatings on aluminium and its alloys using a split beam microscope. The method is applicable, in most industrial cases, to anodic oxidation coatings above 10 m, or above 5 m when the surface is smooth. The use of the method specified is limited by the need for the two luminous lines described in Clause 3 to be visible and distinctly

for the implementation of the location referencing systems used in association with the different publications defined in the Datex II framework

or küntsher nail (without proximal or distal fixation)

New steel grades (e

although no systematic survey has been made

that the device will be properly maintained

Contents of BS EN 969:

BS EN 2011 to comply with the best practices and manufacture airframe bearings as per the specifications

1   This part of ISO 11907 specifies a test method for measuring the corrosive effect

The first symbols on audio and video equipment were mainly designed to overcome the lack of printing area for textual explanation in various languages or to overcome the difficulty in producing separate models for various linguistic or geographical areas

motors and generators

power set legs and rams

This European Standard specifies safety requirements for children's cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm