BP485-48 | BP485 Absorptive Visible Bandpass/Near-IR Block FilterThe MidOpt BP485 48 is commonly used as an internal infrared blocking filter in cameras. When working with any camera that has had its internal filter removed, a mounted BP485 filter can also be considered, which, when desired, allows it to work like the unmodified camera. BP485 is A R coated on both sides, and its spectral response in the blue portion of the spectrum is excellent compared to other absorptive IR blocking filters. Technical

Specifications + Useful Range Min 355 nm Useful Range Max 635 nm Stabledge No Adhesive Backed Yes Tolerance 10 % Peak Transmission ≤ 10 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Clear Glass Filter Diameter M105 x P1

SL164W-53024 Specifications:

6 W Max Strobe Latency 6 us Max Strobe Duration No Limit Max Strobe Frequency 4000 Hz Max Strobe Duty Cycle 100 % Min Strobe Duration 10 ms Max Overcurrent Strobe Current 3000 mA Max Overcurrent Strobe Latency 6 us Max Overcurrent Strobe Duration 50 ms Max Overcurrent Strobe Frequency 4000 Hz Max Overcurrent Strobe Duty Cycle 10 % Min Overcurrent Strobe Duration 10 ms Max Overcurrent Strobe Input Power 72 W Max Duty Cycle 100 % PNP Trigger Voltage 3

Bi Series — Narrow Interference Bandwidth

The ODLX150-395-W-LPI features a lens beam angle of 25 Degree and is Polarized

The DFL-12-470-W can be mounted using the TSLOT channels on the frame

9 in / 200 mm Active Length 11

SL243-625I3S Specifications:

6 mm Image Size Dimensions Not Specified Imager Format 2/3″ Distortion Maximum (%) Not Specified Phase Adjustment Not Applicable Working Distance @ FoV Minimum 80 mm Working Distance @ FoV Maximum 20 mm Working ƒ/N ƒ/16 Mount C-Mount Dimensions Approximate 116 x 381

The focus ring rotates a full 180 degrees

we recommend our BP880 or BP850 filters not only for their longer-wavelength blocking but also for their higher overall peak transmissions

2 μm Weight 107 Mount C-Mount Filter Thread No Filter Threads Minimum Object Distance 110