BP695-52 | BP695 Near-IR Bandpass FilterThe MidOpt BP695 52 is for use with near infrared LEDs. BP695 is also useful for imaging typically weak luminescence, where the subject is often excited with 635nm or 660nm red LED lighting. All MidOpt filters can also be purchased unmounted or in custom dimensions upon request from Machine Vision Direct. Technical Specifications Specifications + Useful Range Min 680 nm Useful Range Max 720 nm Stabledge Yes FWHM 65 nm Adhesive Backed Yes Tolerance 10

PCHIL lenses are the replacement series

Advanced Illumination AL143W-505I3S Downloads:

Gigabit Cable with RJ45 Straight connector to 30 meter 10 Gig

The MidOpt Ni090-37

The SX30G2-WHI-W light has a 30mm diameter and is in the WHITE color with a lens angle of 30 Degree

LL232-60066024 Specifications:

5 x 44 x 44 mm Front Diameter 44 mm Weight 389 Grams Filter Thread No Filter Threads Operating Temperature Range 0 to 40°C Storage Temperature Range 0 to 50°C Operating Relative Humidity (%) Not Specified Installation Location Not Specified Temperature Sensor No FoV @ 1/2

Advanced Illumination DL15118-WHII3S Downloads:

3 W Max Strobe Latency 10 us Max Strobe Duration No Limit Max Strobe Frequency 4000 Hz Max Strobe Duty Cycle 100 % Min Strobe Duration 30 ms Max Overcurrent Strobe Current 2200 mA Max Overcurrent Strobe Latency 6 us Max Overcurrent Strobe Duration 50 ms Max Overcurrent Strobe Frequency 4000 Hz Max Overcurrent Strobe Duty Cycle 10 % Min Overcurrent Strobe Duration 10 ms Max Overcurrent Strobe Input Power 53 W Max Duty Cycle 100 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 20 mA NPN Trigger Voltage < 1 VDC V NPN Trigger Current 15 mA

LL232-300455I3S Specifications:

Product Line / Series HF-HA-1S Lens Type Fixed Focal Length IP Rating Not Specified Focal Length 25 mm ƒ/N ƒ/1

The MidOpt LP920-105 is designed for use with 940nm LED illumination