21318 E SKF Spherical Roller Bearing - 90x190x43This 21318 E bearing is a Spherical Roller Bearing with an optimized internal design for increased load capacity, a flangeless inner ring, two stamped steel cages and a normal radial internal clearance. The bearing's dimensions are 90x190x43. 213 18 E Extra Heavy 90mm Bore Size High Capacity Internal Design Cylindrical Bore Stamped Steel Cage Standard Clearance

Window-Type

SYNT 45 LTS Bearing unit with A plummer block housing Shaft Diameter Bearing unit for the non-locating bearing position

23 17 j Extra Wide Bore Size - 85mm Pressed Steel Cage Normal Radial Internal Clearance

This LWHDG45C4R1050T1HS2 is a high rigidity ball type series linear way with a rail length of 1050mm

This ll639249/ll639210 bearing is an imperial taper roller bearing

It’s particularly effective in precision systems where low noise and minimal heat generation are critical

This 6013-2RSC3 bearing is a sealed deep groove ball bearing with a Radial Internal Clearance Greater than Normal

NU 312 EC P Two Flanges on Outer Ring and No Flanges on Inner Ring 60mm - Bore Size Optimized Internal Design Roller Centred

Cone Reference Cup Reference 681 a 672 Imperial Series Cone Reference Different Bore

the UCF211-34 Unit boasts exceptional strength and reliability

This 392a/394a bearing is an imperial taper roller bearing

This LWHD15C3R1200T1HS2 is a high rigidity ball type series linear way with a rail length of 1200mm