SP645-52 | SP645 Near-IR/Mid-Red Dichroic Block Shortpass FilterThe MidOpt SP645 52 near IR blocking filter is great for inside the camera applications. Also referred to as an infrared cut filter, these filters limit the amount of infrared radiation that reaches delicate CCD and CMOS sensors. Near IR blocking is unusually effective in these filters. CCD CMOS imagers are very sensitive to infrared radiation and, often, deep red wavelengths as well. Using a SP645 filter will reduce or prevent a reddish, washed out

The MidOpt LP665-58 is often used with monochrome cameras to improve contrast and resolution

Electrical Characteristics + Voltage 24 VDC V Max Overcurrent Strobe Current 13000 mA Max Overcurrent Strobe Latency 6 us Max Overcurrent Strobe Duration 125 ms Max Overcurrent Strobe Frequency 5000 Hz Max Overcurrent Strobe Duty Cycle 10 % Min Overcurrent Strobe Duration 30 ms Max Overcurrent Strobe Input Power 312 W Max Duty Cycle 10 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 20 mA NPN Trigger Voltage < 1 VDC V NPN Trigger Current 15 mA

washed-out color of the final image

Brand Advanced Illumination Series BL128 Wavelength 520 Color Green Driver I3S Ingress Protection IP50 Length 11 in Weight 531g Can Be Strobed Yes Can Be Overdrive Strobed Yes Can Be Constantly On Yes Can Be Dimmed Dimmable Connection 2M Flying Lead Full Description

2 Feet Number of Rolls 2 Color Red

Specifications + Useful Range Min 410 nm Useful Range Max 560 nm Stabledge No Adhesive Backed Yes Tolerance 10 % Peak Transmission ≤ 90 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Clear Glass Filter Diameter M37 x P0

Advanced Illumination LL167-03 Downloads:

0 Filter IR cut Burst Frame Rate 31

The ODR80-850-N is in the 850nm Infrared color with a diffuse lens

The MidOpt LP347-58 NIR window is an anti-reflection-coated window specifically optimized for near-infrared transmission while allowing visible light to pass

Advanced Illumination RL113N-50524 Downloads:

CF25ZA-1S Technical Specifications: