Kusuri Koi SedateA safe to use, acetone free koi sedative How to use Fill a suitable bowl with enough water to cover the fish, add measured dosage of sedate, and aerate with an air stone. Place koi into the bowl until it rolls onto its side (normally 2 3 minutes) then lift the koi, if there is any tail movement then place back into solution for a further 30 seconds until it's fully sedated. Do not use below 15C. Do not use with salt Dosage 10ml per 9 litres of pond

is not as effective in removing chloramines

the gel-based solution will stick to the filter media

Add 5 drops of PO4-2 test fluid and shake again

or aeration from an air pump and airstone is recommended

We recommend a scrape and micro- scope identification prior to a second application

• Reduces back pressure on pumps • Improved solids handling

These are Total Alkalinity test strips for the eXact iDip photometer

and oxidizing organic compounds

Take a water sample of 10 ml

which is activated carbon treated with a catalyst

A complete moulded unit

it will reduce backwashing and cut down the number of heavy solids - prolonging the life of your pond equipment