Rigol SD-CAN-DS4CAN BUS Serial Decode Option for the DS4000 Oscilloscope CAN BUS Serial Decode Option for the DS4000 Oscilloscope. CAN Decoding (Option) Press Decode1 ? Decode and select "CAN" to open the CAN decoding function menu. 1. Source Press Source and select any channel (CH1 to CH4) as the source channel. 2. Signal Type Press Signal Type to select the desired signal type. CAN_H: the actual CAN_H bus signal. CAN_L: the actual CAN_L bus signal. Differential:

The tray also contains three pre-drilled and tapped 1/4"-20 holes to secure additional accessories

Non-operation: -20°C to +70°C

Automatic settings

especially at the audible frequency range: 0

This card has 20 voltage channels configurable for 2 or 4 wire measurements and 4 current only measurement channels

This IR kit provides a remote control capability to your project using infrared signals

Operating Temperature: 0℃ to 50℃ ( 32℉ to 122℉ )

incorporating the latest in industrial technology

-AC Frequency response: 40Hz-50kHz

14"H (face)

AC + DC Volts: 200mV

Dusting brush