Ni030-39 | Ni030 Neutral Density Filter - Low Reflectivity 50% TransmissionThe MidOpt Ni030 39 filter features uniform attenuation across the visible and near IR ranges that are imaged by most industrial CCD CMOS cameras. That is, regardless of wavelength within this range, on average, approximately 50% of the light will be transmitted, while less than 10% will be reflected back towards the source or subject. These filters have identical male and female threads on both ends, allowing them to be stacked with other ND filters

Robotic / C-Track cable to HDR / SDR Male Exit LEFT With Recessed Screws connector

Product Line / Series ENVIS-SWIRMP Brand Opto Engineering IP Rating Not Specified Image Circle Diameter 8

it is recommended to use diffused models of the LSR (denoted by the prefix "LSRB") series over the LHF series

Advanced Illumination LL137F-0385024 Downloads:

526 mm Exit Pupil Position -35

This model is 300mm x 150mm and emits WHITE color

The S75-625-L-LPI light is 46mm x 69mm and is in the 625nm Red color with a lens angle of 10 x 50 Degree and is Polarized

2 MP Resolution WxH 2048 x 1536 px Frame Rate/Line Rate 36 fps ROI Yes Interface GigE Vision 1-Cable (PoE) Sensors 1xCMOS Sensor Model IMX265 Optical Format 1/1

2 Feet Long

89 mm CHR70M 55

Brand Advanced Illumination Series DL151 Wavelength 625 Color Red Orange Driver 24 Ingress Protection Not Rated Length 24 in Weight 934g Can Be Strobed No Can Be Overdrive Strobed No Can Be Constantly On Yes Can Be Dimmed Not Dimmable Connection 2M Flying Lead Full Description

Advanced Illumination SL-S050075W-625 Downloads: