Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry1 Scope This International Standard specifies a procedure for determination of the time weighted average mass concentration of mercury vapour and inorganic mercury compounds in workplace air. Mercury vapour is collected on a solid sorbent using either a diffusive badge or a pumped sorbent tube. Particulate inorganic mercury compounds, if present, are collected on a quartz fibre filter. Samples are analysed using either cold vapour atomic absorption

Why should you use BS EN 13869 - Child safety requirements for lighters

13 µg/cm2

BS EN 1779 describes the criteria for the selection of the most suitable method and technique for the assessment of leak tightness by indication or measurement of gas leakage

With BS EN 10222-1

What is PD CLC/TS 50677 - Determination of rinsing effectiveness by measurement of the surfactant content at textile materials about

This Technical Report provides industrial hygienists

It applies to vignole railway rails of 46 kg/m and above according to EN 13674‑1

This Technical Specification on Software Assurance Levels (SWAL) is intended to apply to software that is part of the EATMN

Test on small samples for defining detail categories

BS EN 14617 is a European Standard for testing agglomerated stone products

particularly during manoeuvres in port

BS EN 60335-1 provides best practice recommendations for safety testing household and similar electrical appliances