Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings1 Scope This British Standard specifies procedures for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings for aerospace purposes. The standard is applicable to material specications in the British Standard Aerospace HC series and also to other British Standard material specifications for iron, nickel, copper, cobalt and refractory metal base alloy castings which are suitable for aerospace use.

The standard complements BS EN 206 by providing national provisions where required or permitted by BS EN 206

copper or aluminum

hydrogen bromide (HBr) vapour and hydrobromic acid mist and nitric acid (HNO3) vapour and mist in workplace air by collection on an alkali-impregnated quartz fibre filter and analysis by ion chromatography

NOTE 1 The choice of conditioning climate and conditioning time depends on the purpose of the testing

Why should you use PD IEC TS 62351‑100‑1 - Power systems management and associated information exchange

or process that might cause injury should be safeguarded

Who is BS EN 4134 - Normal hexagonal head bolts for use in aerospace industry for

Almost all the mechanical properties of seasoned timber vary with moisture content and it is therefore important that the moisture content of all test pieces be known at the time of test

be used with other methods of determining density

BS 3821-2 is the second part of the multi-part series that outlines the dimensions of as-sintered pellets and finished hard metal dies and certain quality aspects of finished dies for drawing ferrous and non-ferrous round wire to manufacture efficient as-sintered pellets and finished dies

BS EN 415-8 does not apply to the following machines:

Acceptable means of escape