KT-602 5V 7A Power RelaySPDT(Single Pole Double Throw) relay is used as a switch for high current AC DC appliances which need to be controlled from a microcontroller or sensor output. 5V PCB Mount Sugar Cube SPDT Relay instead of its small size can switch a load of 7A connected to it. The coil resistance of this relay is 70 ohm whereas the coil current is 70mA. The trigger voltage for this relay is 5V. There are 5 pins in this relay i. e, Coil end 1, Coil end 2, COM(common),

The value of all 8 outputs is used to determine the position of the tracking line

In addition

Resistance 100 ohm tolerance 10% Temperature -55°C to 125°C Size 20

Output Terminal: NO

7805 Voltage Regulator

Colour Red/Yellow-Green Forward Voltage 1

a high level is an output through the IO port ECH0

This is widely used in Industries

These are Carbon Film Resistor with a value of 360 ohm 1/4W and tolerance of ±5%

Drain-Source Voltage 800V Max

Bluetooth v4

The UART automatic output mode outputs the measured distance value (hexadecimal number) according to the UART communication format